Argon 4.8 full gas cylinder 10L 2,2m3 Vogelmann

$ 78.99 · 4.5 (315) · In stock

Brand new gas Cylinder full of Argon 4.8. The cylinder is filled with a high quality 99,998% Argon welding compound. A protective cap protects the valve from damage during transport or storage. The cylinder is new and has a working pressure of 200 bar. The cylinder and valve are manufactured according to EN 1964:1999 and have the conformity mark π (pi) with the requirements of ADR / RID. ATTENTION! Our cylinders have a threaded valve (W21.8x1/14) and it is technically possible to fill it. However, filling problems can occur in certain countries such as France, Great Britain due to the type of valve used (G5/8") or Finland (W24,32x1/14) However, filling is possible without problem in most countries. TECHNICAL DATA CYLINDER GAS: Valve: 21.8 x 1/14 DIN 477 Content: 99.998% Argon Capacity: 10l Working pressure: 200 bar Quantity of gas: ~2.2m3
Brand new gas Cylinder full of Argon 4.8. The cylinder is filled with a high quality 99,998% Argon welding compound. A protective cap protects the valve from damage during transport or storage. The cylinder is new and has a working pressure of 200 bar. The cylinder and valve are manufactured according to EN 1964:1999 and have the conformity mark π (pi) with the requirements of ADR / RID. ATTENTION! Our cylinders have a threaded valve (W21.8x1/14) and it is technically possible to fill it. However, filling problems can occur in certain countries such as France, Great Britain due to the type of valve used (G5/8) or Finland (W24,32x1/14) However, filling is possible without problem in most countries. TECHNICAL DATA CYLINDER GAS: Valve: 21.8 x 1/14 DIN 477 Content: 99.998% Argon Capacity: 10l Working pressure: 200 bar Quantity of gas: ~2.2m3 Height: 96 cm Diameter about: 14 cm Weight: ~16 kg Can be used throughout the European Union without additional testing for 10 years Powder coated according to current standards PN-EN INFORMATION 10l cylinders have a protective cap These cylinders are brand new The have a working pressure 200 bar Cylinders and valves are made in accordance with EN1964: 1999 and have an ADR / RID compliance mark and a -40°C mark. They can be filled throughout the European Union.